STAB HH120 USALS/DiSEqC HH satellite motor for antenna up to 120cm()

Motorizations for satellite dishes mod. HH100 - HH120 Rotor SAT HH is a motor that allows to point any satellite dish towards all visible satellites in the polar orbit. The characteristics that make Rotor SAT HH particularly valid are as follows: - Maximum precision - Mechanical robustness - Connection without external feeding, only by coaxial cable - Reduced dimensions - Maximum easiness of installation Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible receivers , where the rotation of the motor automatically begin when selecting the required channel. For all those receiver not providet with DiSEqC, STAB has developed the interfaces MS 220, MP 01, MP 02, to drive the motors by the Tv cable.

	motorizations for satellite dishes model hh 100
	Technical data
	Operating protocol	DiSEqC 1.2
	Maximum antenna diameter	100 cm
	Maximum antenna weight	12 Kg
	Pole support diameter	from 50 to 83 mm
	Antenna support length	125 mm
	Antenna support diameter	54 mm
	Rotation angle	±62°
	Rotation speed	1,8°/s(18V);1,2°/s(13V)
	Operating power supply	13 / 18 Vdc
	Consumption in stand-by mode	30 mA
	Consumption in operating mode	190 mA
	Starting consumption (max)	350 mA
	Operating temperature	-40°C - +80°C
	Maximum relative humidity	100%
	Programmable positions	49 satellites
	Preset positions	28 satellites
	Connectors	F type
	Connection	sat coaxial cable
	Mechanical limits	±70°
	Software programmable limits	from 5° to 62°
	Fine tuning	impulse 0,1°
	Inclination on the pole	from 15 to 70°
	Weight	3 Kg